• Amplify an HDMI signal up to 150 feet
• Supports resolutions up to 1080p
• LED power indicator
• No power supply required, receives power from the HDMI cable it is attached to

Product Description
The Digital Display Working Group (DDWG) has a specification which limits the approved HDMI cable length to 15 meters (approximately 50 feet.) for delivering a full HDTV signals. The HDMI In-line Signal Amplifier Dongle digital interface attaches to the display side connector of an HDMI cable and not only amplifies the signal but it cleans out any noise or digital artifacts from the data and retransmits the picture to the source display. The result is that a high definition video up to 1080p, compressed or uncompressed multi-channel audio, and intelligent format CEC command data can be delivered to 150 feet away from the source component all from one in-line adapter. No external power supply is required as the … More >>

HDMI In-line Signal Amplifier Dongle Adapter

• DIGITAL 40DB VEHICLE REPEATER WIRELESS POWERMAX

Product Description
PowerMax™ DA4000MR Mobile Repeater
3 Watt 38dB Gain Dual Band Wireless Cellular Amplifier / Repeater

Speak and be heard clearly on your cell phone without feeling tied down. By using Digital Antennas wireless PowerMax mobile repeater with your cell phone you’ll experience greater power, range and reliability. Digital Antenna has created the only wireless 3-watt mobile dual band amplifier/repeater in the world for use in boats, cars, RVs, homes, and offices. Superior performance and outstanding range — unequaled in the industry — can now be yours!

Benefits:
Wireless no connections to cell phone
Increases cell phone range up to 50+ miles
Amplifies 800 and 1900 M… More >>

DIGITAL 40DB VEHICLE REPEATER WIRELESS POWERMAX

• For iDEN frequencies 806-821 MHz / 851-866 MHz
• Coverage area up to 2500 sq feet (Un-Obstructed area)
• Automatic gain control up to 50 dB – Approximately 2 dB gain step 30-50 dB
• Max Output Power up to 3 watts – Gain indicator lights
• Power control logic ensures maximum output power is within cellular network standards

Product Description
Wilson amplifiers are small, portable, bidirectional devices that deliver service levels consistent with what would be expected in areas of high cell network coverage. They amplify a weak or shadowed signal in mobile, marine and in-building applications.

When using a Wilson amplifier in conjunction with Wilson antennas, the outside antenna will collect the cell tower signal and send it through the cable to the amplifier. The signal is then amplified and broadcast from the inside antenna to the surrounding area. Cell phones and cellular data cards in that area then communicate with the improved signal. When a cell phone or cellular device transmits, the signal is received by the inside antenna, amplified and b… More >>

Wilson Electronics In-Building Wireless Signal 50db Amplifier Kit 804005 for Nextel / iDEN

• Offers significantly improved coverage than 50db YX-510 – Up to 2.5 times greater coverage (up to 10,000 sq ft unobstructed area)
• Improves all PCS 1900 MHz and Cellular 800 MHz sub bands – Compatible with all networks (except Nextel/iDEN Phones)
• Improves standard CDMA and GSM voice signals, and also EVDO, HSDPA, UMTS, and EDGE data transfers
• Completely wireless – no need to connect to your phone to improve reception
• PROFESSIONAL INSTALLATION RECOMMENDED – 1 year warranty and support from Wireless Extender

Product Description
The zBoost YX610 dual band cellular kit is compatible with all cellular network carriers except for Nextel. This repeater kit is the higher powered 60db version of the popular zBoost YX-510 amplifier. The coverage area has been increased by up to 2.5 times (up to 10,000 sq ft unobstructed area). This unit will improve both voice and broadband data services for any network in an area, as well as extending battery life and reducing radiation emissions from your cell phone. kit comes complete with the amplifier (YX510), power supply, indoor antenna with N-Type F connector, coverage antenna and mounting hardware (Cables not included). All you need to provide is your choice of 75 ohm cable (RG6/RG8) from the donor a… More >>

Wireless Extender zBoost YX610 Dual Band PCS and Cellular 800 / 1900 MHz 60db Amplifier Repeater Signal Booster kit

• Cell Ranger PORT amplifies voice and data signals to provide 2-3 bars more signal up to 6 feet away from the unit.
• 12V cigarette lighter adapter for cars, trucks, RVs, and boats
• Powered either through cigarette lighter adapter(STIX) or mobile computer (PORT).
• Works with any North American 869-894/1930-1990 MHz cell phone and carrier except iDEN/Nextel.
• To work properly, antenna must be mounted first (to a metal surface) before plugging in CLA or USB.

Product Description
The Cell Ranger STIX is an Intelligent Amplifier that boosts signal strength to your cellphone or laptop air card. Cell Ranger is a next-generation microprocessor-driven system that gives you reliability and performance enhancements not found with mesh stick-on and repeater antenna boosters.
The Cell Ranger STIX is easy to install: just place the magnetic antenna on your car’s trunk or roof and plug the unit into your car’s cigarette lighter. After that, Cell Ranger’s advanced circuitry does the rest.
Whether using the STIX for your car or the PORT for your laptop, you can depend on Cell Ranger for the optimum in communications performance.
Cell Ranger equipment supports Auto and Laptop usage across all North … More >>

CellRanger STIX Dual Band Wireless Amplifier 869-894/1930-1990 MHz Up to 50 dB for use with 12V cigarette lighter adapter

The signals are really dependent on how near you are to the tower. This along with how good is the equipment you use dictates voice quality. Not all phones are made alike. Manufacturers want to include a differentiation factor to the high end models hence they put in all their high profile research results in the high end model. <br/>

This includes the higher quality of reception. For the folks who cannot yet promote to the high end equipment, “Shout Out – Listen Intensely” is an everyday mantra. They have lower signal strength and they start hearing the person at ghost whispers. “Make life a little Simple folks”. <br/>

One of the hot selling items in market today is the Cell Phone Boosters Cellular Amplifier. These products advertise to solve the “Shout Out – Listen Intensely” problem. This Cellular Amplifier can be a chip which can be fit on the back of your phone or an antenna which can be fit anywhere either you are in home or travelling.<br/>

Through Cellular Amplifier you can claim to improve the signal strength. They are able to amplify the signals and make the cell phones receive better signals than they would with the default antenna. I have seen many folks who agree or disagree to the product’s claim. <br/>

The reason I am writing this article is raise doubt about the doubter’s logic. What if the manufacturers are adding this feature only to the high end Phone! Let me give an analogy adding a word saying an auction is featured is so simple in HTML but does EBAY offer this to every auction, they offer only to those who pay well.<br/>

The jury is still out there. Except for some small study findings that suggest they do help it is left to the cell phone user to judge whether Cellular Amplifier help or not. The doubter’s main question is if it was so simple a sticker with a printed circuit why the cell phone manufacturers are not including in all phones. <br/>

The benefits are higher if Cellular Amplifier works. All you need is one phone call with a good client when closing a deal and the signal gets weaker. Panic, lost deal, a Cellular Amplifier might have helped. In doing some research the boosters work well in analog phones than the digital one. <br/>

The research is uncertain for digital models. The problem is voice quality is largely dependent on the perception of a human mind. You might have heard of the MOS Factor way of calculating quality, I have not seen any numbers so far. Use the comment section to discuss about this Cellular Amplifier Technology.

You must be thinking its so tedious work to install the cell phone booster, but it’s not like that. The installation of the cell phone booster is not at all a difficult task in fact you can install it by own. For large areas like installation in huge building or any organization then professionally trained installers are best fitted for it.

Cellular amplifier is the latest technology, which have become popular in past few years with the explosion of the cellular phone. Many big companies have launched different types of cellular amplifier which are used to amplify the low or weak signal into high signal.

Due to weak signal problem, many companies came out with the result of Cellular Amplifier. After all the experiments and analysis on cell phones, companies started manufacturing cellular repeaters which was launched to solve the problem of weak signals

A general booster can cover the area of approximately 2500 feet to 50,000 feet which is satisfied service.  The type of cell phone booster do depend on the size of building in which it is going to be installed, if it’s a small room or small apartment than there are low frequency repeaters and if it is to be installed in large building or in bungalows then there are repeater with higher frequency in market.

With the revolution in technology, people’s standard of living raised up quite high. But unluckily, along with the advantages of cell phones, a problem came with it i.e. low signal or low coverage network, in technical terms it is known as Cell Signal Dead Zone. Dead zone is that area where cell phone signals are not proper or cell phone does not function properly. This problem usually comes in basement, huge buildings, and isolate place.

Cell phones have become necessity in everyone’s life… but there is one problem which usually occurs while talking on cell phones i.e. low signals.  The most frustrated thing which has come with cell phones are low signals… it’s so weird phone gets disconnect while talking. To solve this problem many companies have introduced cellular repeaters which is also known as cellular amplifier or cell phone booster.

In past few years nobody even knew about cell phones, at that time landline and pager was so popular and cost of any call especially STD calls were pretty high. But with the passage of time so many companies launched cell phones at cheaper rates and with that cheaper calls had also launched.

Wherever you install cellular amplifier whether it’s your office or home, after installing cell phone antenna it’s for sure after that you will never ever face the problem of weak or low signal at that particular place. You can roam here and there and can talk continuously without any disturbance in your communication.

Moreover, with increment in signal’s strength it also reduces the harm radiations which use to emit by cell phone during usage of it. Most of the cell phone signal repeaters used to be tested and FCC approved, they use to come in very wide variety of pre-packaged plus custom solutions.

Whatever type of cell phone you have there is always ways to improve it. Probably the most common complaint regarding cell phones getting a poor signal. Whether you live in an area that doesn’t have great coverage or you are traveling through the mountains you will always want a better signal. If you have an Apple iPhone for example you will want to be able to use all of it’s featured without being hampered by a poor signal.<br>

A lot of people think that you have to live with a poor signal. After all, if the cell phone carriers don’t install any more cell phone towers in your area then the situation won’t improve. Amplifier Technologies is however, a solution that you can use yourself and that is to invest in a cell signal booster. These are small chips that you place on the back of your phone and will have a huge crash on the signal you can get. Probably the most popular signal booster is the Wilson Cellular Amplifier which will keep working to give you a strong signal all day.<br>

A great benefit that the Wilson Amplifier Technologies gives you is that you can still use your cell phone even if you are nowhere near a cell phone tower. Amplifier Technologies actually gives you full coverage for a distance of fifty miles. Normally this booster will give you double the signal as you would have without it. Using Amplifier Technologies can also make your battery last longer since your phone isn’t working as hard trying to lock onto a signal.<br>

As your phone is tricked into believing that you are closer to a tower than you actually will see improved battery life. This is because the amount of power used depends on how far the nearest tower is.<br>

One time that you might lose your signal is when you are traveling by car. Using the Wilson Cellular Amplifier Technologies your iPhone really improves this since your signal is being amplified by an antenna that sits on the outside of your car. In fact this antenna is powerful enough that you could have a car full of cell phone users and each one would see an improved signal.<br>

Amplifier Technologies is ideally suitable to the Apple iPhone since it works on the GSM and EDGE technologies. If you are constantly suffering from a poor signal then simply attach this signal booster to it and you won’t have to suffer again.

• HDMI 1.3b Compliant to support 36-bit Deep Color up to 1080P and beyond
• Amplifies and Splits HDMI signals to upto four HD Displays
• HDCP Rev 1.2 Specification Compliant
• Supports Full HD1080p
• 2-year warranty

Product Description
The PTC 4 Port HDMI 1.3 V Distribution Amplified Splitter is a distribution hub that sends the same video output to 4 HDTV digital screens. It is a flexible solution to accommodate multiple displays.

The splitter will automatic handshaking with multiple displays with the input device…. More >>

PTC 4-Port HDMI 1.3b Signal Amplified Splitter / Distributor / Multiplier Supports Full HD 1080p

• For 800 MHz Cellular and 1900 MHz PCS Bands
• Works on all generations of CDMA, TDMA AND GSM
• Improves data communication rates needed for 3G technologies
• Receives and transmits better than a cell phone or cellular data card.
• Allows multiple cell phones and cellular data cards to be used at the same time

Product Description
Wilson Electronics In-Building Wireless Dual-Band 824-894 MHz / 1850-1990 MHz SOHO Cellular/PCS Amplifier 801245.
Works on all generations of CDMA, TDMA AND GSM.
AT&T, Cricket, MetroPCS, SprintPCS (NEXTEL/iDEN NOT INCLUDED), T-Mobile, Verizon and other.
Designed specifically for small office and home office enviroments, apartments, high rises, condominiums, and dormitories
FCC and IC type accepted

Kit includes:
Wilson Yagi 13 dbi 806-939 MHz Cellular Antenna 301111

Wilson Yagi 14 dbi 1800-1990 MHz PCS Antenna 301124
Wilson Dual-Band Dome Antenna 301121
Wilson Ultra-Low-Loss Coaxial Cables (50 feet & 15 Feet)
Wilson Dual-Band Splitter / Combiner 859922 (Can connect two outsi… More >>

Wilson Electronics Dual Dand 800 / 1900 MHz 50 db In-Building Wireless Dual-Band SOHO Cellular/PCS Amplifier 801245 Kit